







COOLER MASTER MWE 550 BRONZE V2 550W PSU
- Stock: In Stock
- Model: MPE-5501-ACABW-BIN
- Warranty: 5 YEARS
More from this brand
Power Up
The MWE Bronze offers a simple, reliable way to power your mid-range system safely and efficiently. The 80 PLUS Bronze efficiency rating, DC-to-DC circuit design, discrete cables, silent mode, and 120mm HDB fan offer a power supply unit that's solid in features and performance while remaining simple. This PSU will handle all your core computing needs with none of the hassles or challenges of additional specialty features, software synchronization, or other bells and whistles. Just plug the cables you need into your components and get to work. For a great computing experience, you can’t go wrong with the MWE Bronze.
80 PLUS Bronze Efficiency
The efficiency of your power supply unit is important because it directly affects you system’s performance and your power bill. The efficiency rating does not reflect the quality or reliability of a PSU. It only reflects the unit’s ability to move power from the wall to your components. The higher a PSU’s efficiency is, the lower the total amount of power it needs to power your system. The MWE Bronze series has an 80 PLUS Bronze efficiency rating, meaning it has a guaranteed typical efficiency of 85%.
Cooler Master now reports Cybenetics noise and efficiency ratings for current power supply units where applicable. For more information about the Cybenetics rating system and their work with Cooler Master please click here.
DC-to-DC Circuit Design
Power comes in multiple voltage levels. The wall delivers power in one voltage level but your components each need a specific voltage to operate properly. The process of converting raw power from the wall to the multiple voltage levels your parts need requires special components to complete this process quickly, efficiently, and safely. The MWE Bronze’s DC-to-DC + LLC technology was painstakingly crafted to accomplish this goal. The Dual Forward circuit layout has been designed to convert 12V power to 3V and 5V levels with minimal ripple noise, 80 PLUS Bronze efficiency, and reduced risk to your connected hardware.
Model | MPE-5501-ACAAB |
ATX Version | ATX 12V V2.52 |
PFC | Active PFC |
Input Voltage | 100-240V |
Input Current | 8-4A |
Input Frequency | 50-60Hz |
Dimensions (L x W x H) | 140 x 150 x 86 mm |
Fan Size | 120mm |
Fan Bearing | HDB |
Fan Speed | 1500 RPM |
Noise Level @ 20% | 11.13 dBA |
Noise Level @ 50% | 15.6 dBA |
Noise Level @ 100% | 31.0 dBA |
Efficiency | 85% Typically |
80 PLUS Rating | 80 PLUS Bronze |
ErP 2014 Lot 3 | Yes |
Operating Temperature | 40°C |
Power Good Signal | 100 - 500 ms |
Hold Up Time | >18ms at 100% Full Load@230Vac |
MTBF | >100,000 Hours |
Protections | OVP, OPP, SCP, UVP, OTP |
Regulatory | CCC, CE, TUV-RH, RCM, EAC, cTUVus, FCC, BSMI, KC, CB |
ATX 24 Pin Connectors | 1 |
EPS 4+4 Pin Connectors | 1 |
SATA Connectors | 6 |
Peripheral 4 Pin Connectors | 4 |
PCI-e 6+2 Pin Connectors | 2 |
80 Plus | Bronze |
Modular | Non Modular |
Wattage | 500 to 750W |
Series | MWE Bronze Series |