Your Cart

Unobstructed Airflow

LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.

Honeycomb vents

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.

Ultimate cooling system scenario

With two 200MM fans mounted outside of the frame,you still have enough room
 to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.
Don’t worry about the fan screws, they won’t interfere with the radiator.

Keep the cable nice and neat

The rubber grommets around the motherboard and the cable tie points
at the back of the motherboard tray, with included Velcro straps,
simplify cable management.

Write a review

Note: HTML is not translated!
Bad Good
ModelLANCOOL 215
Dimensions(D) 462mm x (W) 215mm x (H) 482mm
MotherboardE-ATX(width: under 280mm)/ATX/M-ATX/ITX

4.0mm tempered glass (both sides)
Incl Fans2 x 200MM 3-PIN 800 RPM ARGB fans (front)

1 X 120MM 3-PIN 1100 RPM Fans (rear)
Fan SupportFront: 2 x 140mm or 3 x 120mm

Top: 2 x 120mm or 2 x 140mm

Top of PSU chamber: 2 x 120mm
RadiatorFront: 1 x 280/360mm

Top: 1 x 240 / 280 mm
VGA Length370mm
CPU Clearance166mm
DriveBehind MB Tray: 2 x 2.5″ SSD

Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
I/O PortsPower button

Reset button

LED button for lighting mode control


2 x USB 3.0
Dust Filters1 x Top (magnetic), 1 x Bottom (tray)