LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.
Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.
The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.
Ultimate cooling system scenario
With two 200MM fans mounted outside of the frame,you still have enough room
to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.
Don’t worry about the fan screws, they won’t interfere with the radiator.
Keep the cable nice and neat
The rubber grommets around the motherboard and the cable tie points
at the back of the motherboard tray, with included Velcro straps,
simplify cable management.
|Dimensions||(D) 462mm x (W) 215mm x (H) 482mm|
|Motherboard||E-ATX(width: under 280mm)/ATX/M-ATX/ITX|
|4.0mm tempered glass (both sides)|
|Incl Fans||2 x 200MM 3-PIN 800 RPM ARGB fans (front)|
|1 X 120MM 3-PIN 1100 RPM Fans (rear)|
|Fan Support||Front: 2 x 140mm or 3 x 120mm|
|Top: 2 x 120mm or 2 x 140mm|
|Top of PSU chamber: 2 x 120mm|
|Radiator||Front: 1 x 280/360mm|
|Top: 1 x 240 / 280 mm|
|Drive||Behind MB Tray: 2 x 2.5″ SSD|
|Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD|
|I/O Ports||Power button|
|LED button for lighting mode control|
|1 x HD AUDIO|
|2 x USB 3.0|
|Dust Filters||1 x Top (magnetic), 1 x Bottom (tray)|