- Model:BX600C-IN
- 600VA / 360W Line Interactive UPS
- Stepped sine wave, 10 ms transfer
- 3 IS 1293 India 3-pin 6A outlets
- Lead-acid battery, 6 h recharge
- 2 Years Warranty from APC
Overview
The APC Back-UPS BX600C-IN is a 600VA/360W line interactive UPS from the Back-UPS range. It provides battery backup and surge protection through 3 IS 1293 India 3-pin 6A outlets. It suits low power loads such as Wi-Fi routers and DSL modems.
A built-in AVR corrects voltage fluctuations and keeps power to connected devices stable. A 255 J surge energy rating protects the load, and an LED status display shows power status and battery health. The output is a stepped approximation to a sinewave, with a typical transfer time of 10 ms.
It uses an internal 12 V lead-acid battery with a typical recharge time of 6 h, and runs for 16 minutes at 100 W. The compact tower unit measures 21.8 x 10.7 x 23.7 cm and weighs 4.7 kg. APC suggests it for home offices, desktop PCs, home entertainment systems and Wi-Fi routers.
- Compact design, suitable for small spaces
- AVR corrects voltage fluctuations, providing stable power to connected devices
- Easy-to-read LED display for monitoring power status and battery health
- Consistent and reliable power backup with a lead-acid battery
- 255 J surge energy rating
- 3 India 3-pin 6A outlets with battery backup and surge protection
- Runtime of 16 minutes at 100 W
Specifications
- Main input voltage
- 230 V AC 1 phase
- Plug standard
- India 3-pin 6A
- Efficiency at full load
- 145...290 V
- Input frequency
- 45...65 Hz auto-sensing
- Output voltage
- 230 V AC 1 phase
- Rated power in W
- 360 W
- Rated power in VA
- 600 VA
- Output connection
- 3 IS 1293 India 3-pin 6A
- Type of USB power supply
- None
- Maximum configurable power in VA
- 600 VA
- Maximum configurable power in W
- 360 W
- Transfer time
- 10 ms typical : 12 ms maximum
- UPS topology
- Line interactive
- Waveform type
- Stepped approximation to a sinewave
- Full load runtime
- 360 W
- Output frequency
- 50 Hz sync to mains
- Battery type
- Lead-acid internal included
- Control panel
- LED status display with on line : on battery : replace battery and building wiring fault
- Alarm
- Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
- UPS connectivity
- None
- Surge energy rating
- 255 J
- Cable length
- 1.2 m
- Number of cables
- 1
- Color
- Black
- Height
- 218 mm
- Width
- 107 mm
- Depth
- 237 mm
- Product weight
- 4.7 kg
- Mounting preference
- No preference
- Mounting mode
- Not rack-mountable
- Two post mountable
- 0
- USB compatible
- No
- Mounting mode
- Tower
- Number of power module filled slots
- 0
- Number of power module free slots
- 0
- Redundant
- No
- Range of product
- Back-UPS
- Product or component type
- Uninterruptible power supply (UPS)
- Product certification
- BIS
- Ambient air temperature for operation
- 0…40 °C
- Ambient air temperature for storage
- -15…45 °C
- Storage altitude
- 0…15000 m
- Relative humidity
- 0…95 %
- Storage relative humidity
- 0…95 %
- Acoustic level
- 45 dBA
- Operating altitude
- 0...3000 m
- Battery type
- Lead-acid battery
- Battery voltage
- 12 V
- Battery graph comment
- Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
- Extendable runtime
- 0
- Included battery module
- 0
- Empty battery slot
- 0
- Typical recharge time
- 6 h
- RBC quantity
- 1
- Unit Type of Package 1
- PCE
- Number of Units in Package 1
- 1
- Package 1 Height
- 29.5 cm
- Package 1 Width
- 31 cm
- Package 1 Length
- 16.5 cm
- Package 1 Weight
- 5.2 kg
- Warranty (in months)
- 24
Warranty
2 Years manufacturer warranty from APC. Warranty service is provided by the brand's authorised service centre under the brand's own terms; keep the original invoice and the serial number for any claim, and we will guide you through the process. Details are in our Warranty Policy.